SuperUni wood screws / chipboard screws zinc plated yellow
SuperUni wood screws / chipboard screws | zinc plated yellow
| Screw diameter (mm): | 3,5 | 4,0 | 4,5 | 5,0 | 6,0 | 8,0 |
| Screw length (mm): | 16 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 160 | 180 | 200 | 220 | 240 | 260 | 280 | 300 | 320 |
| Drive: | TX15 | TX20 | TX25 | TX30 | TX40 |
| Thread: | Part thread |
| Milling property: | Self-countersinking nibs, milling shank |
| Material: | Steel |
| Surface: | Zinc plated yellow |
| Screw head: | Countersunk head |
| Screw tip: | Cut point |
| Certification: | CE, ETA |
Chrom(III) zinc plated yellow / (Chrom(VI) -free
Head shapes
- Countersunk milling rib head
- Very little damaging of coated timber products
- Suitable for fitting and direct screwing
Type 17 cutting point
- Aids penetration and eliminates the need to pre-drill in almost all timbers and composites
- Special long sharp point fluted to capture chips
- Eliminates splitting even when close to the edge of the timber
- No pre-drilling required in most hard woodscrew point takes immediate hold
Shank cutter
- Reduced drive-in torque, above all with long screws
